Hprc banner tamu.png

Curie:QuickStart

From TAMU HPRC
Jump to: navigation, search

Curie Quick Start Guide

Curie Usage Policies

Access to Curie is granted with the condition that you will understand and adhere to all TAMU HPRC and Curie-specific policies.

General policies can be found on the HPRC Policies page.

Curie-specific policies can be found on the Curie Policies page.

Accessing Curie

Most access to Curie is done via a secure shell session.

Users on Windows computers use either MobaXterm or PuTTY. If MobaXterm works on your computer, it is usually easier to use.

Users on Mac and Linux/Unix should use whatever SSH-capable terminal is available on their system.

The command to connect to Curie is as follows. Be sure to replace [NetID] with your TAMU NetID.

[user1@localhost ~]$ ssh [NetID]@curie.tamu.edu

Note: In this example [user1@localhost ~]$ represents the command prompt on your local machine.
Your login password is the same that used on Howdy. You will not see your password as your type it into the login prompt.

Off Campus Access

Please visit this page to find information on accessing Curie remotely.

For more detailed instructions on how to access our systems, please see the HPRC Access page.

Navigating Curie & Storage Quotas

When users first access Curie, they will be within their home directory. This directory has smaller storage quotas and should not be used for general purpose.

Users can navigate to their home directory with the following command:

[NetID@curie1 ~]$ cd /home/[NetID]

A User's scratch directory has more storage space than their home directory and is recommended for general purpose use. Users can navigate to their scratch directory with the following command:

[NetID@curie1 ~]$ cd /scratch/user/[NetID]

Users can navigate to scratch or home easily by using their respective environment variables.

Navigate to scratch with the following command:

[NetID@curie1 ~]$ cd $SCRATCH

Navigate to home with the following command:

[NetID@curie1 ~]$ cd $HOME

A user's scratch directory is restricted to 1TB/250,000 files of storage. This storage quota is expandable upon request.

A user's home directory is restricted to 10GB/10,000 files of storage. This storage quota is not expandable.

Users can see the current status of their storage quotas with:

[NetID@curie1 ~]$ showquota

If you need a storage quota increase, please contact us with justification and the expected length of time that you will need the quota increase.

The Batch System

The batch system is a load distribution implementation that ensures convenient and fair use of a shared resource. Submitting jobs to a batch system allows a user to reserve specific resources with minimal interference to other users. All users are required to submit resource-intensive processing to the compute nodes through the batch system - attempting to circumvent the batch system is not allowed.

On Curie, LSF is the batch system that provides job management. More information on LSF can be found in the Curie Batch page.

Running A Program / Preparing a Job File

In order to properly run a program on Curie, users will need to create a job file and submit a job.

The simple example job file below requests 1 core on 1 node with 2.5GB of RAM for 1.5 hour. Note that most nodes (>800) on Curie have 20 cores with 54GB of usable memory. Some nodes (~26) have 20 cores with 245GB of usable memory. A few special nodes have more cores and memory than this. Users are encouraged to ensure that their job requirements will fit within these restrictions.

Any modules that need to be loaded or executable commands will replace the "#First Executable Line" in this example.

##NECESSARY JOB SPECIFICATIONS
#BSUB -J JobExample1         #Set the job name to "JobExample1"
#BSUB -L /bin/bash           #Uses the bash login shell to initialize the job's execution environment.
#BSUB -W 1:30                #Set the wall clock limit to 1hr and 30min
#BSUB -n 1                   #Request 1 task
#BSUB -R "span[ptile=1]"     #Request 1 task/core per node
#BSUB -R "rusage[mem=2560]"  #Request 2560MB (2.5GB) per node
#BSUB -M 2560                #Set the per process enforceable memory limit to 2560MB
#BSUB -o Example1Out.%J      #Send stdout/err to "Example1Out.[jobID]"

#First Executable Line

Note: If your job file has been written on an older Mac or DOS workstation, you will need to use "dos2unix" to remove certain characters that interfere with parsing the script.

[NetID@curie1 ~]$ dos2unix MyJob.lsf


More information on job options can be found in the Building Job Files section of the Curie Batch page.

More information on dos2unix can be found on the dos2unix section of the HPRC Available Software page.

Submitting and Monitoring Jobs

Once a job file is ready, it is time to submit the job. Users can submit their jobs to LSF with the following command:

[NetID@curie1 ~]$ bsub < MyJob.lsf
Verifying job submission parameters...
Verifying project account...
     Account to charge:   000000000000
         Balance (SUs):      5000.0000
         SUs to charge:         1.5000
Job <0000000> is submitted to default queue <sn_short>.

After the job has been submitted, users are able to monitor their own jobs with several methods. To see the status of all of your jobs, use the following command:

[NetID@curie1 ~]$ bjobs
JOBID      STAT  USER             QUEUE      JOB_NAME             NEXEC_HOST SLOTS RUN_TIME        TIME_LEFT  
0000000    RUN   NetID            sn_short   JobExample1          1          1     0 second(s)     1:30 L  
0000001    PEND  NetID            sn_short   JobExample1          1          1     0 second(s)     1:30 L  

To see the status of one job, use the following command, where XXXXXXX is the JobID:

[NetID@curie1 ~]$ bjobs XXXXXXX
JOBID      STAT  USER             QUEUE      JOB_NAME             NEXEC_HOST SLOTS RUN_TIME        TIME_LEFT  
XXXXXXX    RUN   NetID            sn_short   JobExample1          1          1     0 second(s)     1:30 L  

To cancel a job, use the following command, where XXXXXXX is the JobID:

[NetID@curie1 ~]$ bkill XXXXXXX
Job <XXXXXXX> is being terminated

More information on submitting and monitoring LSF jobs can be found in the Job Submission section of the Curie Batch System page.

Additional Topics

Translating Curie/LSF <--> Terra/Slurm

The HPRC Batch Translation page contains information on converting between LSF, PBS, and Slurm.

Our staff has also written some example jobs for specific software. These software-specific examples can be seen on the Individual Software Pages where available.

Finding Software

Software on Curie is loaded using modules.

A list of the most popular software on our systems is available on the HPRC Available Software page.

To find most available software on Curie, use the following command:

[NetID@curie1 ~]$ module avail

To search for particular software by keyword, use:

[NetID@curie1 ~]$ module spider keyword

To load a module, use:

[NetID@curie1 ~]$ module load moduleName

To list all currently loaded modules, use:

[NetID@curie1 ~]$ module list

To remove all currently loaded modules, use:

[NetID@curie1 ~]$ module purge

If you need new software or an update, please contact us with your request.

There are restrictions on what software we can install. There is also regularly a queue of requested software installations.

Please account for delays in your installation request timeline.

Transferring Files

Files can be transferred to Curie using the scp command or a file transfer program.

Our users most commonly utilize:

Advice: while GUIs are acceptable for file transfers, the cp and scp commands are much quicker and may significantly benefit workflow.

Reliably Transferring Large Files

For files larger than several GB, users will want to consider the use of a more fault-tolerant utility such as rsync.

[NetID@curie1 ~]$ rsync -av [-z] localdir/ userid@remotesystem:/path/to/remotedir/

An rsync example can be seen on the Ada Fast Transfer page.