Difference between revisions of "HPRC:Access:Windows"
|Line 81:||Line 81:|
In the SSH portion of the GUI, AES encryption should be moved to the top by highlighting it and pressing the "Up" button until it is at the top of the selection policy.
Revision as of 12:38, 14 June 2016
Access from Windows
Using MobaXterm (Recommended)
MobaXterm is an enhanced terminal for Windows with a built-in X11 server, tabbed SSH client, built-in file editor, SFTP functionality, and other useful features. It is available from: http://mobaxterm.mobatek.net/download.html
You will need to choose which license (free Home edition, or professional) and then select the Portable or Installer edition. The Installer edition works best on your personal machine, when you have the privileges to install software. The portable version may be necessary when using a lab workstation, for example. (Be sure to check if MobaXterm is already installed in the Windows Start menu.)
- Open MobaXterm and start a local terminal:
- From the local terminal, connect to the cluster using SSH:
- Open MobaXterm and open the Session settings:
- Enter the hostname in the "Remote Host" field, check the box for "Specify username" and enter the proper username for the cluster you are connecting to,
ada.tamu.eduin this case:
- Once you click OK you will be prompted to enter your password. Enter the proper password for the cluster you are connecting to.
PuTTY is a full-featured, SSH v1.x, v2.x compliant client for Windows. You can get PuTTY as well as PSCP (a tool for encrypted remote file transfer) at: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
- After installing PuTTY, open PuTTY to get a window similar to the following:
- Enter the host name of the remote machine you want to connect to,
ada.tamu.eduin this case. The settings we are configuring for this connection can be saved as a session profile by PuTTY if we give this session a name and click on the "Save" button on this initial window. We have called this session "ada", but we will not yet save the profile since we still need to modify other parameters before we are ready to establish the connection.
- Make sure the SSH parameters are correct. Click on SSH in the category tree (this is found under the "Connection" branch). Verify that the preferred SSH protocol version is "2 only" and the preferred encryption algorithm is AES.
- Next, go to the "Auth" portion of the GUI and make sure that the settings are configured as follows:
- Next, in the "Tunnels" window, enable X11 forwarding:
- Since now we have configured all the parameters as we want them, we can go back to the sessions window and click on the "Save" button to save these settings under the session name of "ada".
- To establish a connection to the cluster, we can now simply highlight the session and click on "Open."
- Finally, you should be presented with a window with a command line interface and will be asked to supply your login name and password:
- Enter the proper credentials for the cluster you are connecting to.
NOTE: If this is the first time you are attempting to connect to the remote machine, PuTTY will warn you that it doesn't know the machine's public key and give you the option of continuing or not. Just click on "Yes". Once this is done, you won't see this message again for this machine unless the public key on the remote machine changes for some reason.
Remote Display of Programs with Graphical Interfaces
MobaXterm has a built-in X11 server, no extra software is needed to display programs with graphical interfaces if you are using MobaXterm. If you are using PuTTY, you will need an X server like Xming.
Xming is an X Server for Microsoft Windows. Although the latest version requires a contribution (approximately $20 USD) there is also an older (free) Public Domain Release (version 184.108.40.206) which can be found at: http://www.straightrunning.com/XmingNotes/
- After installing Xming (or Xming-mesa if you need OpenGL support), start Xming using the installed shortcut.
- Make sure your desired PuTTY session is configured with X11 forwarding as described above.
- Login to the desired cluster via PuTTY.
- Start an xterm window with the following command:
File Transfer from Windows
WinSCP is a graphical SCP, "point and click" encrypted remote file transfer client for Windows. It is built on top of a portion of the PuTTY source code. After downloading, double-click on the icon to begin the installation. Follow all the steps (it is a typical windows install wizard) and choose the "typical" install option when prompted. It should only take a few seconds to install the package. When done, a WinSCP icon should appear on the Desktop.
- Double-click the WinSCP icon to start WinSCP. The following window should appear.
- In the SSH portion of the GUI, AES encryption should be moved to the top by highlighting it and pressing the "Up" button until it is at the top of the selection policy.
- You can now save the settings you just adjusted by going back to the "Session" branch and clicking the "Save" button to get the following dialogue box: </li
- After this is done, go back to the SSH branch and click the "login" button at the bottom of the window. If this is the first time you have accessed this particular remote machine through WinSCP, you will see the following message:
- Click "Yes" to proceed. You will then see the following window:
- Let's say you wanted to copy the file "sc08 template.ppt" from the local computer (left window) to the remote computer (right window). Click on the file "sc08 template.ppt" and hit the space bar to select the file "sc08 template.ppt".
- Now, either press the F5 key or click the icon for "Copy" at the bottom of the window. You will be prompted for a confirmation:
- Finally, a transfer progress window will appear:
Type in the name of the system to which you seek to establish a connection as well as your username and account password for that remote machine. The port number field should contain "22" and the protocol should be set to "SFTP". Next, select the SSH branch from the options tree in the left portion of the window.
To move to the desired directories, use the navigation bars at the top. The local system is on the left and the remote system on the right. The toolbar at the bottom of the window contains function keys for performing copies, deletes, etc.
Depending on the size of the file(s) and the speed of your network connection, this could take a anywhere from a few seconds to several minutes. Many users at TAMU HPRC have very large files. Don't be surprised if a 2GB file takes tens of minutes to complete. When you are ready to disconnect from the remote system, press F10 or just exit from the program.